Bosch Dishwasher Wheel Replacement

Description

Stop Struggling with Your Dishwasher Rack

Is your Bosch or Balay dishwasher rack refusing to slide smoothly? Jerky, stuck, or completely off-track? You don’t need a new dishwasher—you need new wheels.

The Rare Form Works Dishwasher Wheel Replacement is a precision-engineered 3D printed replacement part designed to restore smooth, effortless rolling to your lower dishwasher rack. No more fighting to load dishes. No more worrying about the rack coming off the rails.

Why Replace Your Wheels with a Dishwasher Wheel Replacement?

Dishwasher rack wheels are made of plastic and subject to constant stress from heat, moisture, and the weight of heavy dishes. Over time, they:

• Crack or break completely
• Wear down and no longer roll smoothly
• Fall off the rack, leaving it unstable
• Make your dishwasher difficult and frustrating to use

One broken wheel can make your entire dishwasher feel broken. But replacement is simple—and affordable.

Product Features:

✓ Precision 3D Printed – Manufactured with high-quality filament for durability and exact fit
✓ Heat & Moisture Resistant – Designed to withstand dishwasher conditions (up to 250°F)
✓ Easy Clip-On Installation – No tools required, installs in seconds
✓ Compatible with Bosch & Balay Models – Replaces common OEM part numbers (see compatibility below)
✓ Sold Individually – Order as many as you need (we recommend replacing in pairs or sets of 4)
✓ Made in the USA – Locally produced by Rare Form Works

Specifications:

• Diameter: Approximately 1.4-1.5 inches
• Material: High-grade ABS/PETG filament (BPA-free, heat-resistant)
• Color: Gray (matches OEM appearance)
• Rack Position: Lower rack
• Installation: Snap-clip attachment (no screws, no tools)

Compatible OEM Part Numbers:

This wheel replaces the following Bosch/Balay part numbers:

• 00165314
• 165314
• 420198
• 00420198
• 423232
• AP2802428
• PS3439123
• EAP3439123
• PS8697067

How to Install:

1. Pull out the lower dishwasher rack and set it on a flat surface
2. Locate the broken or worn wheel on the side of the rack
3. Remove the old wheel by pressing the clip and sliding it off the axle
4. Align the new wheel with the axle opening
5. Push firmly until the clip snaps into place
6. Test the wheel by rolling it—it should spin freely
7. Slide the rack back into the dishwasher and enjoy smooth operation

Installation Time: Less than 2 minutes per wheel
Tools Required: None

FAQ

Q: Will this fit my dishwasher?
A: This wheel is compatible with most Bosch and Balay dishwasher models that use OEM part number 00165314 or its equivalents. If you’re unsure, check your dishwasher’s model number (found on the inside edge of the door) or contact us with your model and we’ll confirm compatibility.

Q: How many wheels do I need?
A: Most lower dishwasher racks have 4 wheels total (2 on each side). We recommend replacing all 4 at once since they wear at similar rates. This prevents future failures and ensures smooth, balanced rolling.

Q: Is this as strong as the OEM part?
A: Yes. Our wheels are 3D printed with high-grade, heat-resistant plastic designed to meet or exceed OEM specifications. They’re engineered to handle the weight, heat, and moisture of daily dishwasher use.

Q: Do I need tools to install this?
A: Nope! The wheel uses a simple clip-on design. Just press it onto the axle until it clicks into place. Installation takes less than 2 minutes.

Q: Why is my dishwasher rack hard to pull out?
A: The most common cause is worn, cracked, or missing wheels. When wheels fail, the rack drags or catches on the tracks. Replacing the wheels typically solves this problem immediately.

Q: Can I use this on the upper rack?
A: This wheel is designed for the lower rack. Upper rack wheels are typically smaller and have a different attachment mechanism. Contact us if you need upper rack wheels—we may have a solution for those as well.

Q: How long will shipping take?
A: Orders typically ship within 1-2 business days. Delivery time depends on your location and selected shipping method.